Kittrell Appraisals - Leaders in Sawmill Appraisals
Setting The Standard In The Forest Products Industry Since 1956!

Feldman Lumber Company Inc

Friday, December 18th, 9:00 AM

Lancaster, KY

Terms: Cash, check, or major credit card. 10% buyer’s premium applies to onsite bidders. Additional 3% premium applies to online and phone purchases. 2% credit card fee. 30 days to remove all items from sale site. Real Estate will close in 30 days... anything left after that is subject to new real estate owner.

 931-797-6284
 Email Us
Bid Online
View Brochure
  • Real Estate w/ improvements and separate buildings
  • 12’ X 16’ Portable Break Room Bldg, Metal siding and roof
  • Approx 10 x 12 portable Utility (Barn Building), Approx 10 X 12 Measurements to come
  • Lumber Rack w/ Roof Portable
  • Hardware Store Inventory, hardware, cleaning supplies, plywood, lumber, quickcrete
  • Stihl Chain Saws
  • Stihl Weed Eaters
  • 200 HP Electric Motor
  • Misc Motors and Parts for Sawmill
  • Precision 848 M Debarker, S/N D451 (free standing) Onboard Controls & Hydraulics
  • Precision (4) Strand Infeed Log Deck, W/ H-78 Chain, Motor and Drive
  • Precision Barn Sweep Conveyor, under Debarker W/ Incline Section to Stack Bark
  • Precision Debarker Tie Back, Lots 100-103 10% Raise Entire Free Standing Debarker
  • 30’ (3) Strand Log Deck, W/ Nose Skid, 13 1/2’ Wide
  • (4) HB Carriage, W/ Track & Rails, Cuts up to 24’, has Corley setworks
  • Log Turner, Bar Type
  • Hydraulic Power Pack, 40 HP
  • Tyrone Berry 100 HP Carriage Drive, W/ Drum & Pump Package
  • Husk Frame, W/ Off Bear Belt
  • Sawyer’s Cab, (Valve goes W/ Log Turner)
  • 66’ Webster Vibrating Conveyor, 24” Bottom, 7” Deep, Overall 34”/36, 7.5 HP Drive
  • Incline Box Drag Chain Conveyor, w/ motor and drive
  • (5) HB Handset Modular Sawmill, Super Sweet! W/ Chain Type Log Turner W/ Wooden Husk Frame, Saw Guide W/ Mandrel & Saw Collar
  • Collector Fan,Cast Iron from Head Saw (Runs off Mandrel)
  • (3) Saw Edger, W/ (2) Movable Saws
  • Electric Motor
  • Swing Type Chop Saw, Approx. 24”
  • Koettercar, Natural Gas/ More Details to come
  • Pinheiro (4) Sided Timber Planer, 8” x 24” Wide W/ Operator’s Controls, Shows 5,920 Hours, Includes Electrical Control Panel
  • Bolted on, Top Saw Arrangement
  • 27’ Corley Main Rollcase, 24” Wide W/ Dodge Shaft Mount Reduction Drive & Motor W/ Stop
  • (3) Strand Jump Up Transfer Chain, W/ H-78 Mill Chain, Jump Up Cylinders W/ Shaft Mount Reduction Drive & Motor
  • 636 Edger, (2) Movable Saws, 40 HP Lincoln AC Motor, 230/460V 98/49 Amps 1765 RPM, 10’ Infeed Table W/ 19’ Tailing Device
  • 24’ x 15” W Flat Belt Conveyor, W/ Gear Motor Drive
  • 55’ Corley Rollcase, W/ 20’ of Spiral Rolls and Shaft Mount Reduction Drive, (2) Stops
  • 8’ x 11’ Jump Up Transfer to Gang Saw, H-78 Chain, Motor & Drive
  • Ukiah Double Arbor Gang, TAE12-36, 12” Machine, 24’ x 30” Outfeed W/ OSHA Tunnel, 42576 W/ Saw Glide Lubricating System, 14’ Line Bar Infeed, Very Nice & Compact Machine
  • 200 HP Motor, 1780 RPM 219 Amp 460 Volt
  • 22’ x 11’ Lumber Landing Table, W/ (1) Strand of 81X Chain, (3) Strands of 130 RT Chain, Double Roll Pop Up to Discharge for Ties & Timbers, Lumber Stop
  • Corley 20’ Double End Trimmer, W/ Built in Wood Waste
  • Belt Conveyor, 12’ x 24” Bottom x 12” Deep W/ 22” Belt, Motor & Drive
  • Lumber Sorting Chain, 70’ (4) Strand W/ Detachable Link Chain, Heavy Reduction Drive, 7.5/10 HP Motor
  • Lumber Cart with Pneumatic Tires Choice or X the money, 12’ L x 8’ W
  • Gravity Rollcase, 10’ Section, Lot 124: Timber/Lumber Conveyor, 19’ x 11’ +/-, (3) Strand W/ H-78 Chain, Heavy Duty Motor & Drive
  • Precision 58” Chipper, 58:15, S/N C2595. HFTD 6 Knife
  • 200 HP Motor, 1780 RPM
  • Fulghum 6 x 6” Chip Sizing Screen, W/ 5 HP Motor W/ Oversize Chip Chute & 7.5 HP Fines Blower
  • Dual Chute Chip Loadout System, Phelps 48” W/ 30 HP Motor
  • Safetronics Motor Control, for Chipper W/ Disconnect
  • Barnsweep Conveyor, Under headsaw
  • Super Deluxe! Spiral Roll Feed Table, 20’ x 4’W, (9) Rolls, Double Pineapple W/ Third Feed Roll Assist, Nice Heavy Duty & Long Feed Table
  • Hydraulic Power Pack, Motion Industries, Approx. 5 HP, 3’ x 2’ x 15” Reservoir
  • Shavings Collector Fan and Pipe in Planer mill, Does not included trees to planer
  • 58’ x 48” W (2) Strand Timber Deck, W/ (2) Strands of H-78 Chain, Tulsa Winch Drive
  • Gravity Rollcase, (4) Sections, 20” Wide
  • 5.5 HP Air Compressor, Goodwrench, 25 Gallon
  • Chain Saw Sharpener
  • McDonough RA59 Center Split Resaw, 60 HP Motor, 12” Double Fence, Weighted Strain 76” Blade, Infeed & Outfeed Gravity Roll
  • Newman Machine Rip Saw, (3) Blade, 60 AMP, S/N 8400
  • Cornell Double Arbor Gang Saw, Model CL8B, S/N 71-12-87 W/ Operator’s Controls, Infeed Belt Conveyor (No Belt), No Outfeed
  • Strobe Saws, (1) Lot
  • Electrical at Double Arbor Cornell, Siemens 200 AMP Disconnect, Cutler Hammer 200 AMP Disconnect, Westinghouse Electrical W/ Raceway and 110 Electrical
  • Cornell DAG, Includes Infeed and Outfeed with pedistal controls
  • Armstrong Band Saw Grinder
  • Wright Auto 350 Dual Side Grinder, Model W-350 Auto Dual S/N G9424
  • Wright Top and Face Grinder
  • Wright W-725 Stobe Saw Facer, Model W-725 S/N E9603
  • Thin Kerf Guide Mold
  • Babbitt Melting Pot
  • Saw Guide Facing Machine
  • 48” Knife Grinder Make unknown
  • Possible Williams Wright Circle Stretcher Roll
  • Circle Saw Hammering Stand
  • Acme Saw Sharpener w/ Diamond Wheel
  • Atlas Copco GA18+ Air Compresser, S/N AP1331928 25 HP
  • Nano Compressed Air Dryer
  • Ingersoll Rand Model 2475 Vertical Tank Mount Air Compressor, In Sawmill 5-7.5 HP S/N. NAR10112541
  • And MUCH More! View the Auction Brochure
Back to Auction Listings
Content

Get the Value you Need!

Let's start a conversation about your appraisal needs.